GRUNDFOS 1/6 HP Circulator

$920.40$962.00

Installation Instructions

SKU: N/A Category: Tags: ,

Description

Pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. The pump is characterized by:

  • Ceramic shaft and radial bearings.
  • Carbon axial bearing.
  • Stainless steel rotor can and bearing plate.
  • Corrosion-resistant impeller, Composite, PES.
  • Cast iron pump housing.

The motor is a 1-phase motor. No additional motor protection is required.

Technical:
Approvals on nameplate: UL, CSA

Materials:
Pump housing: Cast iron
EN-JL1030
ASTM 30 B
Impeller: Composite, PES

Installation:
Maximum ambient temperature: 104 °F
Ambient max at 176°F liquid: 176 °F
Maximum operating pressure: 145 psi
Flange standard: USA Threaded
Type of connection: S.S. Union
Pipe connection: 1 1/4″ NPSM
Pressure stage: 10
Port-to-port length: 7.05 in

Electrical data 115 Volt:
C run: 10 µF
Max. power input: 215 W
Rated power – P2: 0.16 HP
Main frequency: 60 Hz
Rated voltage: 1 x 115 V
Current in speed 3: 2.15 A
Capacitor size – run: 10 µF/180 V
Number of poles: 2
Insulation class (IEC 85): F

Electrical data 230 Volt:
C run: 2.5 µF
Max. power input: 220 W
Rated power – P2: 0.16 HP
Main frequency: 60 Hz
Rated voltage: 1 x 230 V
Current in speed 3: 1.07 A
Capacitor size – run: 2.5 µF/380 V
Number of poles: 2
Insulation class (IEC 85): F

Others:
Gross weight: 10.5 lb

Additional information

Weight 10 lbs
Dimensions 8 × 8 × 8 in
Voltage

115 Volt, 230 Volt

Go to Top