Temperature Sensor Well 1/2″ NPT

Description

Description
Bulb Wells are used in conjunction with Remote Bulb Temperature Controls
where bulb insertion into a vessel or container to sense temperature is
required. These wells are used with TE-6000 and TE-6300 Series Sensors.
A variety of shapes, sizes, and materials are available for a wide
range of applications. Refer to the appropriate temperature control
for the exact bulb well required.

Accessories
The Code No. FTG13A-600R Packing Nut Assembly is used in applications
where the temperature does not fall below -35°F (-37°C).
The maximum liquid pressure limit is 150 psig (1,034 kPa). Use with
Style 1, 3/8 in. diameter bulb for direct immersion application. A19s
require models with support tube; A70s and A72s do not need support tubes.